Extra slim v2.2 board (SDRAM XS v2.2)
This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the onboard DDR3 cannot be used.
All the Extra Slim (XS) SDRAM boards have been checked under a microscope to ensure no solder bridges are present, then each board is tested at 150Mhz for at least half an hour. Every one of my boards uses the higher quality Winbond chips, high quality KEMET branded capacitors are used on each board.You can be confident knowing each Extra Slim (XS) v2.2 SDRAM board has been tested for over half an hour at 150MHz using the SDRAM Board Test Service Core . I also test each with a number of console cores in games to ensure no issues are present.
– Suitable For Terasic DE10-Nano FPGA Board
– Winbond W9825G6KH-6 Chip
– KEMET High Quality Capacitors
– Tested For Over Half An Hour @ 150MHz
– MiSTer IO Board Compatible
If you need the others products for Mister FPGA, please click below: