Mini Fan 3D print Mount Kit for Dreamcast

Introduction:

    Please note this kit is not compatible with early revision Dreamcast consoles know as VA0, these systems are fairly rare in all regions except Japan. The easiest way to determine if you have this model is to open the system, if you have a silver or grey fan attached to a metal heatsink it is a VA0.

    This kit is designed to mount a high airflow quiet fan in the place of the original stock Dreamcast fan. It is specifically built for the Noctua NF-A4x10 5V fan. This mod shines in systems with GDROM emulators like the USB-GDROM and the GDEMU. It makes those systems nearly silent. It may not do much to systems with the original disk drive still installed as the disk drive is louder than the cooling fan. 

And the Dreamcast Noctua Fan Cable, which custom built conversion cable that plugs into the original fan connector and converts the signal so that the new fan functions properly (built in 10K resistor).

Package Includes:

3D print mount kit only:

–  3d printed fan ducte

–  3d printed replacement door release latch

–  Dreamcast Noctua Fan Cable

3D print mount kit + NF-A4x10 5V premium fan:

–  3d printed fan ducte

–  3d printed replacement door release latch

–  NF-A4x10 5V premium fan

–  Dreamcast Noctua Fan Cable