Gcloader 3d print installation for gamecube

Tools

Gamebit 4.5mm security screwdriver

Philips Screwdriver size no. 1

step 1

Remove the 4 security screws shown with arrows using a game bit driver.

Step2

Remove the back plate and front plate. Gently pull the flex cable at the arrow location.

Step3

Remove the two screws, unplug power cable and remove fan unit

Step 4

Remove all screws shown with arrows.

Step5

Remove Top DVD drive assembly.

Step6

Remove DVD drive from metal shield by removing all screws as shown

Step7

Install the GCLoader 3d print with the supplied screws

Step8

Connect gcloader and fix the 3d print

Step 9

Now you can start re-assembly of your GameCube. Congratultions, you are done!